29
(ENG) VQT3U05
Easily set a suitable exposure (one push AE)
With one push AE, you can easily achieve a suitable exposure setting when the exposure
setting is too bright or too dark. ( , , modes only)
At purchase, one push AE is assigned to the [Fn1] button.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when the
shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in mode.
1 Set the [Fn BUTTON SET] of the [CUSTOM] menu to [ONE PUSH AE].
•
The initial setting for [Fn1] is [ONE PUSH AE].
2 (When exposure is not adequate) Press [Fn1].
DMC-GX1X&GX1K&GX1EB-VQT3U05_eng.book 29 ページ ２０１１年１０月２６日 水曜日 午後５時１１分
To Next Page
Loading...
