Recording
34
SQT0790 (ENG)
Image Stabiliser
The camera can activate either the In-Lens Image Stabiliser or In-Body Image Stabiliser, or
it can activate both of them and reduce jitter even more effectively. (Dual I.S.)
For motion picture recording, the 5-Axis Hybrid Image Stabiliser is available. It uses both
the optical stabiliser of the lens and the electronic stabiliser of the camera’s sensor.
•
The image stabilisers to be activated differ depending on your lens. The icon for the currently
activated image stabiliser is displayed on the recording screen.
¢ When [E-Stabilization (Video)] is set to [ON]
Applicable modes:
•
When using an interchangeable lens with O.I.S. switch (such as H-FS14140), stabiliser
function is activated if the O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of
purchase)
1
Select the menu. (P23)
When taking pictures
When recording
motion pictures
Panasonic lenses compatible with Dual I.S.
(Based on the Micro Four Thirds System
standard)
• For the latest information on compatible
lenses, please refer to our website.
• If [ ] or [ ] is not displayed even when a
compatible lens is used, update the lens
firmware to the latest version.
(P8)
Lens + Body
(Dual I.S.) ( / )
Lens ( )
5-Axis Hybrid
()
¢
Lenses compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Lens ( / )
Lens ( )
5-Axis Hybrid
()
¢
Lenses not compatible with the image
stabiliser function
(Based on the Micro Four Thirds System
standard/Four Thirds System standard)
Body ( / )
—
()
When using a Leica lens mount adaptor
(optional) or mount adaptor made by
another manufacturer
• Set [Shoot w/o Lens] to [ON].
> [Rec] > [Stabilizer]
DMC-GX8A&GX8H&GX8K_GCGH-SQT0790_eng.book 34 ページ ２０１５年７月８日 水曜日 午前９時１１分
To Next Page
Loading...
