Connecting to other equipment
89
VQT1C39
• To find out more about PictBridge
compliant printers, contact your local
dealer.
∫ Selecting a single picture and printing
it
1 Press 2/1 to select the picture
and then press [MENU/SET].
• The message disappears in about
2 seconds.
2 Press 3 to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
3 Disconnect the USB connection
cable after printing.
∫ Selecting multiple pictures and
printing them
1 Press 3.
2 Press 3/4 to select an item and
then press [MENU/SET].
¢ This only appears when [FAVORITE]
(P74) is set to [ON]. (However if none of
the pictures have [ ] displayed, you
cannot select it even if [FAVORITE] is
set to [ON].)
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
1/3
100
_
0001
PRINT
SELECT
MENU
MULTI PRINT
MENU
SET
MENU
SET
１秒
OFF
SINGLE PICTURE
NUM. OF PRINTS
1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECTCANCEL SET
MENU
PRINT START
OFF
[MULTI SELECT] Multiple pictures are
printed at one time.
• After selecting
[MULTI SELECT],
press 2/1 to select
the pictures to print
and then press 4.
The icon [ ]
appears on the
pictures to be printed.
(Press 4 again to
cancel the setting.)
Press [MENU/SET]
after finishing the
setting.
[SELECT ALL] Prints all the stored
pictures.
[DPOF PICTURE]
Prints the pictures set
in [DPOF] only. (P78)
[FAVORITE]
¢
Prints the pictures set
as favorites only. (P74)
１秒
OFF
PictBridge
DPOF PICTURE
SELECT ALL
FAVORITE
SELECT CANCEL
SET
MENU
MULTI SELECT
MENU
SET
VQT1C39ENG.book 89 ページ ２００６年１２月２１日 木曜日 午前１０時５７分
To Next Page
Loading...
