15
(ENG) VQT3Z42
Installing supplied software
• The supplied CD-ROM includes the following software.
– PHOTOfunSTUDIO 8.0 SE (Windows XP/Vista/7)
– LoiLoScope 30 day full trial version (Windows XP/Vista/7)
(This will only install a shortcut to the trial version download site.)
• Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
•
Operating environment of “PHOTOfunSTUDIO 8.0 SE”
– OS:
Windows
R
XP (32bit) SP3,
Windows Vista
R
(32bit) SP2,
Windows
R
7 (32bit/64bit) and SP1
– CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
Pentium
R
III 800 MHz or higher (Windows Vista
R
),
Pentium
R
III 1 GHz or higher (Windows
R
7)
– Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit),
2 GB or more (Windows
R
7 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further
operating environment.
Insert the CD-ROM with the supplied software.
•
When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu.
Click on the [Recommended Installation].
•
Proceed with installation according to messages appearing on the screen.
Note
• The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO” is not compatible with Mac.
DMC-SZ1&FS45EB-VQT3Z42_mst.book 15 ページ ２０１１年１２月２２日 木曜日 午後９時１８分
To Next Page
Loading...
