Playback/Editing
_ Press Air to select the and then
settings, [MENU/SET].press
[W/O TIME]: Stamp the year, month and day.
[Shooting Date] [WITH TIME]: Stamp the year, month, day, hour and minutes.
[OFF]
[_:i]:
[Name]
([Face Recognition])
Name registered in Face Recognition will be
stamped.
([Baby/Pet])
Stamps names registered in name settings for
[Babyl]/[Baby2] or [Pet] in Scene Mode.
[OFF]
[ON]: Stamps the travel destination name set under
[Location] [Location].
[OFF]
[ON]: Stamps the travel date set under [Travel Date].
[Travel Date]
[OFF]
_ Press ['_/Z_].
_ Press to select [OK], and then press [MENU/SET].
• Confirmation screen is displayed, it is executed when [Yes] is selected,
Exit the menu after it is executed.
• When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
• You can set up to 50 pictures at one time in [MULTI].
• The picture quality may deteriorate when text stamping is carried out.
• Depending on the printer being used, some characters may be cut at printing. Check before
printing.
• When text is stamped onto the 0.3M pictures, it is difficult to read it.
• Text and dates cannot be stamped on the pictures in the following cases.
- Motion pictures
-Pictures taken in [Panorama Shot] in Scene Mode
-Pictures recorded without setting the clock
-Pictures with date or text stamped
-Pictures recorded with other equipment
- 104 -
To Next Page
Loading...
