Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
It cannot be restored once divided.
_ Select [Video Divide] on the [Playback] menu. (P42)
_ ress </1_ to select the motion picture to divide, and then press
[MENU/SET].
_ Press • at the location to divide.
• Motion picture is played back from the same location when • is
pressed again.
• You can finely adjust the location for division by pressing </1_
while the motion picture is paused.
_ Press I'.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the
dividing.
• [Video Divide] may not be performed on motion pictures recorded with other equipment.
• Motion pictures cannot be divided at a location close to the start or end of the motion picture.
• The order of images will change if motion pictures are divided.
It is recommended to search these motion pictures by using [Calendar] or [Category Selection]
in the [Filtering Play].
• Motion pictures with a short recording time cannot be divided.
- 105-
To Next Page
Loading...
