Connecting to other equipment
• Viewing the contents of the built-in memory or card using the PC
(folder composition)
For Windows:
For Mac:
desktop
_ Built-in Memory
Card
I'i_O0PANA "I
q O0 PA_ ] ,/
"LO__ j
ploo,oool..
PlOOOO%.%=
P1000999.JPG
-[AD=LUMIX I*
L LUMmXUP.EXE
A drive ([Removable Disk]) is displayed in [Computer]
A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the
Images
DCIM:
O Folder number
O File number
JPG: Still pictures
MP4: MP4 Motion pictures
MISC: DPOF print
Favorite
AD_LUMIX: For Upload set
LUMIXUP.EXE Upload tool
"LUMIX Image Uploader"
Cannot be created in the built-in memory.
A new folder is created when pictures are taken in the following situations.
• After [No.Reset] (PS0) in the [Setup] menu has been executed
• When a card containing a folder with the same folder number has been inserted (such as when
pictures were taken using another maker of camera)
• When there is a picture with file number 999 inside the folder
• Disconnecting the USB connection cable safely
Select the [_] icon in the task tray displayed on the PC, and then click
[Eject DMC-XXX] (XXX varies by model).
• Depending on your PC's settings, this icon may not be displayed.
• If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
• Connection in the PTP Mode
(Windows <R)XP, Windows Vista C_,Windows (_ 7, and Mac OS X only)
Select [PictBridge(PTP)] when connecting USB cable.
• Data can now be read only from the card into the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
Mode.
• Motion picture cannot be played back in PTP Mode.
- 121 -
To Next Page
Loading...
