Others
First, try out the following procedures (P140-151).
If the problem is not resolved, it may be improved by selecting [Reset] (P51) on the
[Setup] menu.
• The battery is exhausted. Charge the battery.
• If you leave the camera on, the battery will be exhausted.
Turn the camera off frequently by using the [Auto Power Off] etc. (P50)
• Insert all the way until you hear a locking sound and it is locked by the lever while being careful
about the direction the battery is inserted. (P19)
• Is there any memory remaining on the built-in memory or the card?
Delete the pictures which are not necessary to increase available space in the memory.
(P40)
• You may not be able to record for a short while after turning the power on when using a large
capacity card.
• The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.
• Is the inside of the lens fogged?
There is condensation. Refer to "When inner side of the lens is fogged (condensation)" on
P5 for what to do.
- 140-
To Next Page
Loading...
