- 43 -
Basic
• The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
• The travel date is calculated using the date in the clock setting and the departure date you set. If you
set [World Time] to the travel destination, the travel date is calculated using the date in the clock
setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• The number of days that have passed since the departure date is not recorded before the departure
date.
• [Location] cannot be recorded when taking motion pictures.
• [Travel Date] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode will be
reflected.
— [Travel Date]
Departure date and return date of the travel as well as the name of the
travel destination can be set.
You can display the number of days that have passed when playing
back the pictures and stamp it on the recorded pictures with [Text
Stamp] (P108).
[Travel Setup]:
[SET]:
Departure date and return date are set. Elapsed days (how many
days after) of the travel are recorded.
[OFF]
•
The travel date is automatically canceled if the current date is after the
return date. If the [Travel Setup] is set to [OFF], [Location] will also be
set to [OFF].
[Location]:
[SET]:
Travel destination is recorded at the time of recording.
[OFF]
•
For details on how to enter characters, refer to “Entering Text” on P77.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
