- 55 -
Recording
¢1 This can be set only when Intelligent Auto Mode is set. The icon changes depending on the type
of subject and brightness. (P31)
¢2 The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal] (P96) on the [Rec] menu is set to [ON], [ ] appears on the flash icon.
Item Description of settings
[‡] ([Auto]) The flash is automatically activated when the recording conditions
make it necessary.
[]([iAuto])
¢1
[]
([Auto/Red-Eye])
¢2
The flash is automatically activated when the recording conditions
make it necessary.
It is activated once before the actual recording to reduce the
red-eye phenomenon (eyes of the subject appearing red in the
picture) and then activated again for the actual recording.
• Use this when you take pictures of people in low lighting
conditions.
[‰]
([Forced Flash On])
The flash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under fluorescent
light.
[]
([Slow Sync./Red-Eye])
¢2
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is activated so
that the dark background will become bright. Simultaneously, it
reduces the red-eye phenomenon.
• Use this when you take pictures of people in front of a dark
background.
[Œ]
([Forced Flash Off]
)
The flash is not activated in any recording conditions.
• Use this when you take pictures in places where the use of
flash is not permitted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
