(ENG) VQT4B39 11
Inserting and removing the card (optional)/
the battery
To charge the battery, insert it into the camera.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( ) to [OPEN] before
opening the card/battery door
[OPEN] [LOCK]
Insert the battery and card,
making sure that their
orientation is correct
• Battery:
Insert all the way firmly until a
locking sound is heard, and check
that it is locked by lever ( ).
• Card: Insert all the way firmly until it
clicks.
Do not touch
the terminal
Close the card/battery door
Slide the release lever to the [LOCK] position.
■
To remove
• To remove battery:
Move lever in direction of arrow.
• To remove card:
Push the card until it clicks, then
pull the card out.
Lever
●
Always use genuine Panasonic batteries (DMW-BCG10E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
We recommend using a Panasonic Memory card.
To Next Page
Loading...
