- 87 -
Playback/Editing
∫ To filter images for slide show playback
You can filter images and play them back in a slide show by selecting
[Filtering] on the slide show menu screen.
•
If you select [All], you can play back all images in a slide show.
You can also filter images by using the same setting as [Filtering Play].
Refer to P88–89 for the setting.
• The filter settings are stored even after terminating slide show playback.
To cancel filtering, refer to P88.
∫ Changing the slide show settings
By selecting [Setup] on the slide show menu screen, you can change the
settings such as [Effect] and [Duration] for slide show playback.
Settings Description of settings
[Effect]
This allows you to select the screen effects or music effects when switching
from one picture to the next.
[NATURAL]/[SLOW]/[SWING]/[URBAN]/[OFF]
• When [URBAN] has been selected, the picture may appear in black and
white as a screen effect.
• Some [Effect] will not operate when playing back pictures displayed
vertically.
• When [Filtering] is set to [Motion Pic. Only], [Effect] is fixed to [OFF].
[Duration]
[1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
• When playing back the following pictures, the [Duration] setting is
disabled.
– Motion pictures
– Panorama pictures
[Repeat] [ON]/[OFF]
[Sound]
[OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played back,
and audio is played when the motion pictures are played
back.
[Music]: Music is played back.
[Audio]: Audio (only for motion pictures) is played back.
To Next Page
Loading...
