19
(ENG) VQT2G33
Basic
• Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being
written, read or deleted, or the built-in memory or the card is being formatted].
Furthermore, do not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer
operate normally.
If operation fails due to vibration, impact or static electricity, perform the
operation again.
Press the shutter button halfway to focus.
• The focus indication 1 (green) lights when the subject
is focused.
• The AF area 2 is displayed around the subject’s face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
• The focus range is 3 cm (0.10 feet) (Wide)/1 m
(3.28 feet) (Tele) to ¶.
Press the shutter button fully (push it in
further), and take the picture.
•
The access indication lights red when pictures are being
recorded on the built-in memory (or the card).
DMC-ZR1P-VQT2G33_eng.book 19 ページ ２００９年７月７日 火曜日 午後３時３３分
To Next Page
Loading...
Need help?
General
