VQT2G33 (ENG)
20
Basic
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its color changes to the usual red.
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.
• When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s face, and it
will adjust the focus and exposure. (Face detection)
• If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the Scene Mode has been identified as [ ], the shutter speed will be set to a maximum of
8 seconds. Take care not to move the camera while taking pictures.
• When [FACE RECOG.] is set to [ON], and the face similar to the registered face is detected, [R]
is displayed in the top right of [ ], [ ] and [ ].
¢ When [FACE RECOG.] is set to [ON], [ ] will be displayed for birthdays of registered faces
already set only when the face of a person 3 years old or younger is detected.
It is possible to set the focus to the specified subject. Focus will keep following the subject
automatically even if it moves.
1 Press 3.
•
[ ] is displayed in the upper left of the screen.
• AF Tracking frame is displayed in the center of the
screen.
• Press 3 again to cancel.
2 Bring the subject to the AF tracking frame, and
press 4 to lock the subject.
•
AF tracking frame will turn yellow.
• An optimum scene for the specified subject will be
chosen.
• Press 3 to cancel.
Scene detection
¦
>
[i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
•
Only when [‡] is selected
[i-NIGHT SCENERY]
[i-BABY]
¢
AF Tracking Function
DMC-ZR1P-VQT2G33_eng.book 20 ページ ２００９年７月７日 火曜日 午後３時３３分
To Next Page
Loading...
Need help?
General
