(ENG) VQT4S90 23
Using the GPS function to execute positioning
Press [MENU/SET] ( )
Press to select [GPS]
menu and press [MENU/SET]
Press to select
[GPS Setting] and press
[MENU/SET]
Press to select [ON] and press [MENU/SET]
• A message appears on the screen. After confirming the
message, press [MENU/SET].
■
When [GPS Setting] is [ON], the GPS function works even if the
camera is turned off.
• Electromagnetic waves from the camera can affect instruments
and meters. During takeoff and landing of airplanes or in other
restricted areas, set [Airplane Mode] to [ON] and turn off the
camera.
• When [GPS Setting] is [ON] and [Airplane Mode] is [OFF], power
will drain from the battery even if the camera is turned OFF.
To Next Page
Loading...
