60 VQT2R20 VQT2R20 61
Taking pictures according to the scene
[SCENE MODE]
Recording Mode:
[CUSTOM] Switch to your own settings and record
Settings registered in [CUST.SET MEM.] can be quickly called up by setting the mode dial
to
.
Set to (recording)
Set to (Custom Mode)
Select custom set
• Press [DISPLAY] to display the
registered settings content.
Use ◄► to switch between
screens.
Press [DISPLAY] again to return.
●
Even if [REC] menu, etc. is changed in [CUSTOM], the content of the custom set does
not change. When changing registration content, reset in [CUST.SET MEM.].
●
At the time of purchase, [PROGRAM AE] Mode initial settings are registered in the
custom set.
Register your own settings and record
[CUSTOM] Mode (continued)
Recording Mode:
Using [SCENE MODE] enables you to take pictures with optimum settings (exposure,
coloring, etc.) for given scenes.
Set to
Set to
Select and set the scene
(Press [MENU/SET] and then press ►, if
scene menu is not displayed)
●
Scene menu
Zoom lever can
also be used to
switch to next
screen.
To see description of each scene:
Select the scene, and press the
[DISPLAY] button.
■
To take motion pictures
(→72)
■
Registering commonly used
scenes
[MY SCN MODE] (→71)
[MY SCENE MODE] (→71)
●
Selecting a Scene Mode inappropriate for the actual scene may affect the coloring of
your picture.
●
Following [REC] menu settings will be automatically adjusted and cannot be selected
manually (available settings vary according to scene setting).
[INTELLIGENT ISO], [SENSITIVITY], [METERING MODE], [I.EXPOSURE], [MIN.
SHTR SPEED], [I.RESOLUTION], [COLOR EFFECT], [PICT.ADJ.]
●
White Balance can only be set in the next scene. (Setting is restored to [AWB] when
scene is changed.)
[PORTRAIT], [SOFT SKIN], [TRANSFORM], [SELF PORTRAIT], [PANORAMA ASSIST]
(First picture only), [SPORTS], [BABY], [PET], [HIGH SENS.], [HI-SPEED BURST],
[PIN HOLE], [HIGH DYNAMIC], [PHOTO FRAME], [UNDERWATER] (fine adjustment
only)
●
The types of flash available (→48) vary according to the scene. The Scene Mode flash
setting is reset to the default setting when the Scene Mode is changed.
●
Guidelines displayed in gray in [NIGHT PORTRAIT], [NIGHT SCENERY], [STARRY
SKY], and [FIREWORKS] Scene Modes.
[MENU/SET]
[DISPLAY]
Zoom lever
To Next Page
Loading...
Need help?
General
