Panasonic Lumix DMW-FL580L - User Manual

Operating Instructions
Manuel d’utilisation
取扱説明書
FLASH
フラッシュライト
VQT5F44-1
F0214KD1044
Please read these instructions carefully before using this product, and
save this manual for future use.
Il est recommandé de lire attentivement ce manuel avant d’utiliser
l’appareil et de le conserver pour consultation ultérieure.
このたびは、パナソニック製品をお買い上げいただき、まことにありがとうござ
います。
≥ 取扱説明書をよくお読みのうえ、正しく安全にお使いください。
≥ ご使用前に「安全上のご注意」（3 〜 5ページ）を必ずお読みください。
≥ 保証書（裏表紙）は「お買い上げ日・販売店名」などの記入を確かめ、
取扱説明書とともに大切に保管してください。
DMW-FL580L
Model No.
Modèle
品番
If you have any questions, visit:
USA : www.panasonic.com/support
Canada : www.panasonic.ca/english/support
Pour toute assistance supplémentaire, visiter :
www.panasonic.ca/french/support
保証書付き
VQT5F44_JPN_PP_E.book 1 ページ ２０１４年４月１７日 木曜日 午前１１時６分

Panasonic Lumix DMW-FL580L Specifications

General

Power Source	4 x AA batteries
Wireless Control	Yes
TTL	Yes
LED Light	Yes
Guide Number	58 (ISO 100, m)
Zoom Range	24-105 mm
Bounce Angle	0-90 degrees
Flash Coverage	24-105 mm
Compatibility	Panasonic/Lumix
Recycling Time	Approx. 3.5 seconds

Summary

Information for Your Safety

General Safety Warnings

Precautions to reduce risk of fire, electric shock, or product damage.

Handling Cautions

Guidelines for safe installation and ventilation to prevent hazards.

Important Safety Instructions

Operational Precautions

Handling the Unit

Guidelines for handling the flash unit to prevent damage and ensure proper operation.

Unit Overview

Flash Unit Components

Control Panel Functions

Continuous Firing and Heat

Attaching the Flash to Camera

Powering the Flash Unit

Basic Shooting Operation

Flash Mode Selection

TTL AUTO Mode

Automatic flash control based on camera settings and brightness.

Auto Mode (Flash Sensor)

Flash adjusted by brightness captured by flash sensor; camera communication needed.

Manual Mode

Flash emitted according to guide number setting for manual control.

Remote Control (RC) Mode

Wireless control with compatible Panasonic digital cameras.

FP TTL AUTO Mode

High-speed sync flash level set automatically for fast shutter speeds.

FP MANUAL Mode

High-speed sync flash level set manually for fast shutter speeds.

Control Panel Buttons

Flash Level Adjustment

Adjust flash level by up to ±5 EV, combined with camera compensation.

Lighting Angle Adjustment

Advanced Multi Flash Mode

Shutter Speed Calculation for Multi Flash

Maximum Continuous Flash Counts

Wireless Shooting Setup

Wireless Mode Setup

Steps to set up the camera and flash for wireless communication.

Wireless Unit Positioning

Positioning Remote Flashes

Instructions for attaching the stand and positioning the flash for wireless shooting.

Bounce Flash Techniques

Wide Panel Usage

Catch Light Plate Usage

Filter Attachments and Use

Filter Types and Usage

Customizing Flash Settings

Setting Flash Mode

Select and set the flash mode from available options.

Adjusting Flash Intensity

Fine-tune flash intensity using the +/- adjustment.

Setting Lighting Angle

Setting Guide Number

Setting Wireless Group

Setting Wireless Channel

Advanced Custom Settings

Resetting Custom Settings

Operation Without Camera Link

AUTO Mode Without Communication

How to use AUTO mode when the flash cannot communicate with the camera.

MANUAL Mode Without Communication

How to use MANUAL mode when the flash cannot communicate with the camera.

Slave Mode Operation

Slave Mode Setup and Positioning

Instructions for setting up and positioning the flash in Slave Mode.

Important Usage Cautions

Unit Handling Cautions

Guide Number Reference

Manual Mode Guide Numbers

Table of guide numbers for Manual flash mode at various lighting angles.

FP Manual Mode Guide Numbers

FP Manual Mode Calculations

Technical Specifications

Supported Flash Modes

Guide Number Specification

Main guide number and value with wide panel.

Lighting Angle Coverage