.Lens
Care
• Sand
and
dust
can
damage
the
lens. Make
sure
that
no
sand
or
dust
gets
inside
the
lens
or
the
terminals
when
using
the
lens on a
beach, etc.
•
This
lens
is
not
waterproof.
If
drops
of
water
get
onto
the
lens,
wipe
the
lens
with
a
dry
cloth.
•
Do
not press the protective glass with excessive
force.
• When there
is
dirt (water, oil, and fingerprints, etc.)
on
the surface
of
the protective glass, the picture
may
be
affected. Lightly wipe the surface of the
protective glass with a soft, dry cloth before and
after taking pictures.
•
Do
not place the lens mount facing downwards.
Do
not allow the lens contact points
CD
to become
dirty.
•
About
Condensation
(Fogging
of
the
Lens)
• Condensation occurs when there are differences
in
temperature and humidity
as
described below.
Condensation can cause the lens
to
become dirty
and lead to mold and malfunctioning, so exercise
caution
in
the following situations:
- When the camera is brought indoors from outside
during cold weather
- When the camera
is
brought into
an
air-
conditioned car
- When cold air from
an
air conditioner
is
directly
blown onto the lens
-In
humid places
• Put the camera into a plastic bag to allow it to
acclimatize to the surrounding temperature
in
order to prevent condensation. If condensation
occurs, turn the power off and leave it for about
two hours. Once the camera acclimatizes to the
surrounding temperature the condensation will go
away naturally.
5
VQT3B92
To Next Page
Loading...
