Camera Customization – [Setup] Menu
585
[USB]
[Battery Use Priority]
[USB Mode]
`[ ] [Select on connection] / [ ]
[PC(Storage)] / [ ] [PC(Tether)]
This sets the communication method to be used when the USB connection cable is
connected.
[ ] [Select on connection]: Select this setting to select the USB communication
system when connecting to another device. (ÎUSB port: 665)
[ ] [PC(Storage)]: Select this setting to export images to a connected PC.
(ÎImporting Images to a PC: 670)
[ ] [PC(Tether)]: Select this setting to control the camera from a PC installed with
“LUMIX Tether”. (ÎTethered Recording: 676)
[USB Power Supply] `[ON] / [OFF]
Provides power from the USB connection cable.
• Even if this item is set to [OFF], power will be supplied when the AC adaptor is
connected.
[BODY] / `[BG]
Selects which battery to use first when the batteries are installed in both the camera
and the Battery Grip.
(ÎSelecting Battery Usage Priority: 682)
To Next Page
Loading...
