Panasonic Matsushita DD66C12GBU6 User Manual

1.7
1.9
2.1
2.3
2.5
2.7
2.9
-40 -30 -20 -10 0 10 20
Current (A)
80
120
160
200
240
280
-40 -30 -20 -10 0 10 20
Input Power (W)
200
400
600
800
1,000
1,200
1,400
1,600
1,800
-40 -30 -20 -10 0 10 20
Evaporating Temperature (°F)
Capacity (BTU/H)
110°F 120°F 130°F
Rated Performance Data
Cond. Temp I* Cond. Temp II*
Capacity . . . . . . . . . . . . . . 192 Btu/h ±7% 874 Btu/h ±7%
E.E.R. . . . . . . . . . . . . . . . . . 4.61 Btu/Wh ±7% 5.36 Btu/Wh ±7%
Current . . . . . . . . . . . . . . . 2.13 Amps 2.02 Amps
Nominal Motor Data
Motor Input . . . . . . . . . . . . . . .172 Watts 163 Watts
Rated Current . . . . . . . . . . . . 2.20 Amps
Type . . . . . . . . . . . . . . . . . . . . RSCR, PTC relay
Locked Rotor . . . . . . . . . . 14.2 Amps
Start Current . . . . . . . . . . 21.5 Amps
Coil Resistances Run . . . . 3.40 Ohms
@ 68°F (20°C) Start . . . 5.60 Ohms
*Test Conditions for Performance Specifications
Test Oil . . . . . . . . . . . . . . . . ISO VG 10
Shell Temp . . . . . . . . . . . . . . 170.0°F / 76.0°C
Condensing Temp . . . . . . . . . (I) 130.0°F / 54.4°C
. . . . . . . . . (II) 105.0°F / 40.6°C
Evaporating Temp . . . . . . . . .-10.0°F / -23.3°C
Ambient Temp . . . . . . . . . . . . 90.0°F / 32.2°C
Gas Superheat . . . . . . . . . . . 90.0°F / 32.2°C
Liquid Sub-Cooling . . . . . . . . 90.0°F / 32.2°C
Electrical Accessories
†
Overload Protector
Nominal Operating Characteristics
Model Name 4TM762MFBYY
Manufacturer Texas Instruments
Temperature To . . . . . . . . . . . Open: 239 °F ± 9°F / 115°C ± 5°C
Close: 142°F ± 16°F / 61°C ± 9°C
Trip Current . . . . . . . . . . . . . . @158°F (70°C) 4.20 Amps ± 7.5%
@77°F (25°C) 14.0 Amps @ 18 sec. max.
P.T.C. Starting Device
Nominal Operating Characteristics
Model Name PTH7M6R8MC1 PTH490C-AS6R8
Manufacturer Murata Mfg. Murata Mfg.
Base resistance
@ 77°F(25°C) ±20% 6.8 6.8 Ohms
Power Consumption (max) 2.9 3.5 Watts
Operation time 0.6 to 1.8 1.0 to 2.7 seconds
Recovery time (max) 60 65 seconds
Run Capacitor — µF — V
†Although these accessories are listed by UL/CSA for use with this compressor,
Matsushita assumes no responsibility whatsoever for these or any other components
sourced by the refrigeration system manufacturer from third parties.
Panasonic Industrial Company
Refrigeration Products Department
Tel: 201 - 392 - 4249
Fax: 201 - 392 - 4315 Rev#1-5/9
Evaporating Temp.
Condensing Temp. Rating -30°F -10°F +10°F
130°F Btu/h 355 789 1,393
Watts 111 171 231
Amps 1.84 2.13 2.55
E.E.R. 3.20 4.61 6.03
120°F Btu/h 389 816 1,420
Watts 116 168 223
Amps 1.86 2.12 2.49
E.E.R. 3.36 4.85 6.36
110°F Btu/h 423 843 1,451
Watts 119 164 214
Amps 1.86 2.10 2.43
E.E.R. 3.56 5.13 6.77
MATSUSHITA Compressor Single Phase 115 V
MODEL# DD66C12GBU6 R-134a 60
Hz
Performance Curves
Voltage Range . . . . . . . . . 103 Volts to 127 Volts @ 60 Hz
Application . . . . . . . . . . . . Low Back Pressure
Compressor Cooling . . . . Fan Cooling
Refrigerant Control . . Capillary Tube
Evaporator
Temp. Range . . . . . . . -31°F to 23°F / -35°C to -5°C
9 – Point Data
P
a
na
s
o
n
ic
®

Panasonic Matsushita DD66C12GBU6 Specifications

General

Brand	Panasonic
Model	Matsushita DD66C12GBU6
Category	Compressor
Language	English

Summary

Rated Performance Data

Capacity

Rated cooling capacity under specific conditions, with tolerance.

E.E.R.

Energy Efficiency Ratio (EER) for cooling performance, with tolerance.

Current

Electrical current consumption under test conditions, with tolerance.

Nominal Motor Data

Motor Input & Rated Current

Motor power input and rated electrical current for compressor operation.

Motor Type & Starting Characteristics

Compressor motor type, locked rotor, start current, and coil resistances.

Test Conditions for Performance Specifications

Test Oil and Temperatures

Specifies test oil type and operating temperatures for shell, condensing, and evaporating.

Ambient, Superheat, and Sub-Cooling

Defines ambient temperature, gas superheat, and liquid sub-cooling for testing.

Electrical Accessories

Overload Protector Details

Information on the overload protector, including trip and close temperatures.

P.T.C. Starting Device

Nominal Operating Characteristics

Details on PTC starting device characteristics like base resistance and operation time.

9 - Point Data

Dimensions

Component Dimensions (mm/inches)

Provides detailed measurements for various components labeled A through F.

Electrical Diagram

R.S.I.R. Wiring Configuration

Schematic diagram illustrating the R.S.I.R. wiring with motor protector and PTC relay.

Tube and Material Specifications

Suction, Process, Discharge Tubes

Details on tube outer diameter, wall thickness, and material for connections.

General Data

Oil Charge and Net Weight

Information on oil charge quantity and the net weight of the compressor with oil.

Approved Oils and Purity

Lists approved oil types and specifications for residual moisture and impurities.

Displacement

Specifies the compressor's displacement volume in cc and cubic inches.