EasyManua.ls Logo

Panasonic Matsushita QA51K13GAU6 User Manual

Panasonic Matsushita QA51K13GAU6
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2.4
2.5
2.6
2.7
2.8
2.9
3.0
30 35 40 45 50 55 60
Current (A)
180
200
220
240
260
30 35 40 45 50 55 60
Input Power (W)
900
1,100
1,300
1,500
1,700
1,900
2,100
2,300
30 35 40 45 50 55 60
Evaporating Temperature (°F)
Capacity (BTU/H)
120°F 130°F 140°F
Rated Performance Data
Capacity . . . . . . . . . . . . . . 1,810 Btu/h ±10% *
E.E.R. . . . . . . . . . . . . . . . . . 7.24 Btu/Wh ±10% *
Current . . . . . . . . . . . . . . . 2.85 Amps *
Nominal Motor Data Motor Input . . . . . 250 Watts*
Rated Current . . . 2.29 Amps
Type . . . . . . . . . . RSIR, PTC relay
Locked Rotor . . . . . . . . . . 14.5 Amps
Start Current . . . . . . . . . . 20.1 Amps
Coil Resistances Run . . . . 2.41 Ohms
@ 68°F (20°C) Start . . . 9.69 Ohms
*Test Conditions for Performance Specifications
Test Oil . . . . . . . . . . . . . . . . Freol α 22
Shell Temp . . . . . . . . . . . . . . 170.0°F / 76.0°C
Condensing Temp . . . . . . . . . 130.0°F / 54.4°C
Evaporating Temp . . . . . . . . . 45.0°F / 7.2°C
Ambient Temp . . . . . . . . . . . . 95.0°F / 35.0°C
Gas Superheat . . . . . . . . . . . 95.0°F / 35.0°C
Liquid Sub-Cooling . . . . . . . . 115.0°F / 46.1°C
Electrical Accessories
Overload Protector
Nominal Operating Characteristics
Model Name MM3-38EC
Manufacturer Matsushita
Temperature To . . . . . . . . . . . Open: 230°F ± 9°F / 110°C ± 5°C
Close: 142°F ± 15°F / 61°C ± 8°C
Trip Current . . . . . . . . . . . . . . @158°F (70°C) 3.8 Amps ± 7.5%
@77°F (25°C) 11.0 Amps @ 18 sec. max.
P.T.C. Starting Device
Nominal Operating Characteristics
Model Name MM8-5CDP4M7 PTH7M4R7MC1
Manufacturer Matsushita Murata Mfg.
Base resistance
@ 77°F(25°C) ±20% 4.7 4.7 Ohms
Power Consumption (max) 4.0 3.0 Watts
Operation time 1.5 to 3.5 0.7 to 2.2 seconds
Recovery time (max) 85 70 seconds
Run Capacitor — µF — V (min.)
†Although these accessories are listed by UL/CSA for use with this compressor,
Matsushita assumes no responsibility whatsoever for these or any other components
sourced by the refrigeration system manufacturer from third parties.
Panasonic Industrial Company
Refrigeration Products Department
Tel: 201 - 392 - 4249
Fax: 201 - 392 - 4315 Rev#1-5/9
Evaporating Temp.
Condensing Temp. Rating +30°F +45°F +59°F
140°F Btu/h 1,212 1,734 2,421
Watts 224 261 299
Amps 2.67 2.93 3.23
E.E.R. 5.41 6.64 8.10
130°F Btu/h 1,246 1,810 2,516
Watts 216 250 282
Amps 2.61 2.85 3.09
E.E.R. 5.77 7.24 8.92
120°F Btu/h 1,301 1,885 2,602
Watts 208 238 265
Amps 2.57 2.77 2.97
E.E.R. 6.25 7.92 9.82
MATSUSHITA Compressor Single Phase 115V
MODEL# QA51K13GAU6 R-134a 60
Hz
Performance Curves
Voltage Range . . . . . . . . . 103 Volts to 127 Volts @ 60 Hz
Application . . . . . . . . . . . . High Back Pressure
Compressor Cooling . . . . Fan Cooling
Refrigerant Control . . Capillary Tube
Evaporator
Temp. Range . . . . . . . 23°F to 59°F / -5°C to 15°C
9 – Point Data
P
a
na
s
o
n
ic
®
Question and Answer IconNeed help?

Do you have a question about the Panasonic Matsushita QA51K13GAU6 and is the answer not in the manual?

Panasonic Matsushita QA51K13GAU6 Specifications

General IconGeneral
BrandPanasonic
ModelMatsushita QA51K13GAU6
CategoryCompressor
LanguageEnglish

Summary

Compressor Specifications

Rated Performance Data

Key performance metrics including capacity, EER, and current.

Motor and Starting Data

Details on motor input, rated current, starting current, and coil resistances.

Test Conditions and Accessories

Specifies test conditions and details on overload protectors, PTC starting devices, and run capacitors.

Performance Characteristics

Performance Curves

Graphs showing input power, current, and capacity versus evaporating temperature.

9-Point Performance Data

Comprehensive performance data at nine specific temperature points.

Compressor Dimensions and General Data

Physical Dimensions

Detailed measurements and diagrams of the compressor's physical size and port locations.

General Operating Data

Information on oil charge, weight, approved oils, moisture, impurities, and displacement.

Related product manuals