How to unlock temperature settings on Panasonic MDF-U334-PK?
If your Panasonic Freezer isn't accepting temperature setting changes, the key lock may be ON. Set the key lock to OFF mode to adjust the temperature.
Why is the cooling poor in my Panasonic MDF-U334-PK?
Poor cooling in your Panasonic Freezer can stem from several causes. First, make sure the ambient temperature isn't too high and that the freezer door is firmly closed. Check for excessive frost buildup on the chamber wall and remove it if necessary. Ensure the set temperature is correctly inputted. Avoid direct sunlight and nearby heating sources. Verify the rubber cap and insulation for the access port are correctly set. Finally, avoid putting too many unfrozen items into the freezer at once.
What to do if the Panasonic MDF-U334-PK chamber is not cooling at all?
If your Panasonic Freezer's chamber isn't cooling, start by checking the circuit breaker. If the voltage is too low, call an electrician. Make sure the power switch is turned ON. If you've stored a large amount of items at once, try reducing the quantity. Also, the freezer may be in defrost mode, so wait until it's finished.
Why is my Panasonic MDF-U334-PK making noise?
Noises from your Panasonic Freezer can arise from a few things. Ensure the freezer is on a sturdy, level floor, adjusted with leveling feet. Check that nothing is touching the frame. If the freezer just started, give it time to stabilize. High chamber temperatures due to a large load can also cause noise; reducing the load may help. The noise should lessen as the chamber cools.
General| Brand | Panasonic |
|---|---|
| Model | MDF-U334-PK |
| Category | Freezer |
| Type | Upright Freezer |
| Voltage | 115 V |
| Frequency | 60 Hz |
| Defrost Type | Manual |
| Shelves | 3 |
| Door Lock | Yes |
| Energy Star Certified | No |
| Color | White |
| Total Capacity | 333 L |
| Temperature Range | -20°C to -30°C |
| Temperature Range (F) | -4°F to -22°F |
| Weight (lbs) | 66 |
| Power Supply | AC |
| Annual Energy Consumption | 215 kWh |
Explains warning symbols, caution symbols, and labels found on the unit.
Lists critical safety warnings related to electrical hazards, installation, and operation.
Covers further safety warnings concerning maintenance, power cords, and storage.
Provides important cautions regarding power sources, corrosive substances, and unit stability.
Details the function of each button and indicator on the freezer's control panel.
Details procedures for setting high and low temperature alarm thresholds.
Summarizes various alarms, safety functions, and self-diagnostic features of the unit.
Lists common malfunctions and their corresponding checks and remedies.
Provides detailed technical data including dimensions, capacity, materials, and components.
To Next Page