Panasonic MDF-U700VXC-PA User Manual

Please read these instructions carefully before using this product, and save this operating instructions
for future use.
See page 54 for all Model Numbers.
MDF-U700VX
MDF-U700VXC
Series
MDF-U700VX
MDF-U700VXC
Ultra-Low Temperature Freezer
Operatin
g
Instructions

Panasonic MDF-U700VXC-PA Specifications

General

Brand	Panasonic
Model	MDF-U700VXC-PA
Category	Freezer
Type	Ultra-Low Temperature Freezer
Power Supply	220-240V, 50/60 Hz
Number of Doors	1
Defrost System	Manual
Alarm System	Power Failure, Door Open
Safety Features	Key Lock
Temperature Range	-86°C to -50°C

Summary

INTRODUCTION

PRECAUTIONS FOR SAFE OPERATION - GENERAL

PRECAUTIONS FOR SAFE OPERATION - USAGE AND ELECTRICAL

PRECAUTIONS FOR SAFE OPERATION - MAINTENANCE AND DISPOSAL

PRECAUTIONS FOR SAFE OPERATION - CAUTIONS AND ENVIRONMENT

ENVIRONMENTAL CONDITIONS

FREEZER COMPONENTS OVERVIEW

FREEZER COMPONENTS DETAILS

CONTROL PANEL

Explains the parts and functions of the freezer's control panel for user interaction.

CONTROL PANEL AND PORTS

REMOTE ALARM TERMINAL

Details the connection and function of the remote alarm terminal for monitoring.

AIR INTAKE PORT

Describes the air intake port and procedures for its maintenance and use.

INSTALLATION SITE REQUIREMENTS

INSTALLATION PROCEDURES

START-UP OF UNIT

OPERATION AFTER POWER FAILURE

Explains how the unit resumes operation after a power interruption.

CONTROL PANEL FUNCTIONS

RUNNING OPERATION (Set)

Details on setting operational parameters like temperature and alarms.

LOGGING DATA (Log)

Information on recording and retrieving temperature data using the log function.

VARIOUS SETTINGS (Tools)

Access to various configuration and utility settings for the unit.

TOP SCREEN DISPLAY

RUNNING OPERATION MENU

CHAMBER TEMPERATURE SETTING

Step-by-step procedure to set the desired internal chamber temperature.

ALARM TEMPERATURE SETTING

How to configure high and low temperature alarm thresholds.

ALARM DELAY TIME SETTING

Setting the delay for alarm activation to prevent false alarms.

ALARM RING BACK SETTING

Configuring the delay before the alarm buzzer sounds again.

KEY LOCK FUNCTION

Enabling or disabling the keypad to prevent unauthorized changes.

KEY LOCK RELEASE

Procedure to unlock the control panel using a password.

LOGGING AND DATA TRANSMISSION

DISPLAY OF LOG DATA

Viewing recorded temperature data on the display.

DATA TRANSMISSION TO PC

Steps for transmitting logged data to a personal computer.

VARIOUS SETTINGS MENU

INITIALIZATION (Tools/Default Setting)

Resetting parameters to factory default settings.

DATE, TIME, AND INTERVAL SETTINGS

SET OF DATE AND TIME

Setting the current date and time on the control panel.

SET OF DOOR ALARM DELAY TIME

Adjusting the delay before a door opening triggers an alarm.

SET OF LOG INTERVAL

Defining the frequency at which temperature data is recorded.

CHANGE OF COMPRESSOR DELAY TIME

Setting delay times for compressor startup after power restoration.

PASSWORD SETTING AND ALARM BUZZER

SET OF KEY LOCK PASSWORD

Changing the password for the key lock function.

ALARM BUZZER FUNCTIONS

Explains different types of alarm buzzers and their behavior.

MONITOR OF FREEZER STATUS

OPERATION MONITOR SYSTEM LIST

Table detailing status indications, messages, and remedies for various conditions.

ALARMS & SAFETY FUNCTIONS

ALARM AND SAFETY FUNCTION LIST

Comprehensive list of alarms, their situations, indications, and safety operations.

ROUTINE MAINTENANCE - CLEANING

CLEANING OF CABINET

Instructions for cleaning the exterior and interior of the freezer unit.

DEFROSTING OF INSIDE WALL

Step-by-step process for removing frost from the chamber walls.

ROUTINE MAINTENANCE - AIR INTAKE PORT

TROUBLESHOOTING GUIDE

DISPOSAL OF UNIT AND BATTERY

RECYCLE OF BATTERY

Guidance on recycling the rechargeable battery used in the unit.

DECONTAMINATION OF UNIT

Instructions for decontaminating the unit before disposal, especially if biohazardous.

DISPOSAL INFORMATION - EU

DISPOSAL INFORMATION - MULTILINGUAL

DISPOSAL INFORMATION - MULTILINGUAL (CONT.)

DISPOSAL OF BATTERY

OPTIONAL TEMPERATURE RECORDER

SETTING OF MTR-85H RECORDER

Procedure for setting up and loading the MTR-85H temperature recorder.

TEMPERATURE RECORDER OPTIONS

REPLACEMENT OF RECORDER BATTERY

How to replace the battery in the temperature recorder.

SETTING OF INK PEN

Instructions for properly setting the ink pen in the recorder.

TEMPERATURE RECORDER MTR-G85C

LOADING THE INK PEN

Step-by-step guide for installing the ink pen into the MTR-G85C recorder.

TEMPERATURE RECORDER OPERATION

STARTING RECORDING AND SETTING TIME

How to begin recording and set the correct time on the recorder.

REPLACING THE RECORDING PAPER

Steps to replace the old recording paper with a new one.

BACKUP COOLING KIT (OPTION)

BACKUP COOLING KIT OPERATION

Instructions for operating the backup cooling kit, including testing and setting.

OPTIONAL ACCESSORIES

SMALL INNER DOOR (OPTION)

Details on the optional small inner door and its performance impact.

INTERFACE BOARD INSTALLATION

Instructions for installing interface boards for PC connectivity.

OPTIONAL INVENTORY RACKS

SPECIFICATIONS

PERFORMANCE DATA

SAFETY CHECK SHEET