EasyManua.ls Logo

Panasonic MDF-U76V - Page 40

Panasonic MDF-U76V
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
SPECIFICATIONS
Product name
Ultra-Low Temperature Freezer
MDF-U56V
Ultra-Low Temperature Freezer
MDF-U56VC
External dimensions
W770 mm x D870 mm x H1990 mm
Internal dimensions
W630 mm x D600 mm x H1400 mm
Effective capacity
526 L
Exterior
Painted steel
Interior
Painted steel
Outer door
Painted steel
Inner door ABS resin panel with stainless frame, 2 doors
Shelf Stainless steel, 3 shelves (adjustable)
Inner dimension; W608 mm x D535 mm, Load; 50
kg
/shelf
Access port 17 mm diameter, 2 locations (back, bottom x 1)
Insulation
Vacuum insulation panel + Rigid polyurethane foamed-in place
Compressor High stage side; Hermetic rotary type, Output; 450 W
Low stage side; Hermetic type, Output; 750 W
Evaporator Tube on sheet type
Condenser High stage side; Fin and tube type, Low stage side; Shell and tube type
Refrigerant
High stage side; R-404A, Low stage side; R-508B
Temperature controller Microcomputer control system
Temperature display Digital display
Thermal sensor Platinum resistance (Pt 1000
Ω
)
Alarm High temp. alarm, Low temp. alarm, Power failure alarm
Door alarm, Filter alarm
Remote alarm contact
Allowable contact capacity: DC 30 V, 2 A
Battery Nickel-metal-hydride battery, DC 6 V, 1100 mAh, Auto-recharge (5HR-AAC)
Accessories 1 set of key, 1 scraper, 1 stick for air intake port cleaner
Weight 300
kg
305
kg
Voltage booster None Built-in
Optional component Temperature recorder (MTR-G85)*,
Small inner door (MDF-5ID1),
Drawer rack (MDF-50R)
Interface board (MTR-480, MTR-L03),
Data acquisition system (MTR-5000),
Inventory rack (IR-220U, IR-224U),
Back up cooling kit (CVK-UB2/CVK-UB2(I)): LCO
2,
(CVK-UBN2): LN
2
Note
:
• Design or specifications will be subject to change without notice.
• Refer to the updated catalog when ordering an optional component.
*: Power source of the temperature recorder shall be 220 V.
When a data transmitting function to the personal computer is done, an interface board MTR-480
(option) and communication cable of 9 pin Dsub cross type for RS232C are necessary.
The connecting cable between the PC and MTR-L03 terminal is not enclosed. Provide a cross
type cable of less than 100 m length having a pin plug.

Related product manuals