Panasonic Mini DV NV-DS25 - Page 13

No. Item/Part Fig. Removal(Screw& Other)
8. LCD Unit (NV-DS25
Only)
Fig. 5-1 5-Screws(O/P)
Remove the LCD Unit from Side Case (R) Unit.
Fig. 5-2 2-Screws(Q)
Unlock---(e)
Remove the LCD Case(Upper).
Disconnect the following connectors.
FP901/FP903/FP904/FP905
Unsolder read wire from Back Light Unit.
Fig. 5-3 1-Screw(R)
Remove the Back Light Unit DBEF Sheet and Monitor
C.B.A.
9. EVF Unit Fig. 6-1 Remove the EVF Flex. from Battery Case Unit.
Remove the EVF Plate Spring/EVF Slide Angle.
2-Screws(S)
Remove the EVF Unit from Battery Case Unit.
Fig. 6-2 6-Screws(T/U)
Remove the Eye Cap Holder and EVF Case(Upper).
Fig. 6-3 Pull out the EVF Flex.
Remove the EVF Holder Piece.
Fig. 6-4 Unlock---(f)
Disconnect tht following connectors.
FP802/FP803
Remove the E.V.F.(A) C.B.A.
Fig. 6-5 Unlock---(g)
Remove the E.V.F.(B) C.B.A.
Fig. 1-1
Fig. 1-2
13