18
Problems Possible cause Page
The blender does not operate
•
•
•
•
•
•
•
Troubleshooting
See P.9 &
P.12
The blender stops operating
midway through operation.
• The Circuit Breaker Protection of the motor has been tripped.
Check whether prohibited, hard or too many ingredients have been
placed in the container.
• The Circuit Breaker Protection will also be tripped when abnormal
sounds are heard or high levels of vibration are generated.
See P.15
The ingredients being
processed are leaking out.
• The blender container or mill container is not mounted correctly.
• The gasket has not been installed.
See P.7 &
P.9 & P.12
截
截
ﺯﺍﺰﺘﻫﻻﺍ
To Next Page
Loading...
