To Next PageTo Next PageWhy is my Panasonic MX-EX1031 Blender making abnormal noises?
Abnormal noise or increased vibration in your Panasonic Blender can be due to a couple of reasons. You might have too many ingredients in the blender, in which case you should reduce the amount. Alternatively, if you are using a mill container, its base might not be assembled tightly; ensure it is properly secured.
What to do if my Panasonic MX-EX1031 is leaking?
If your Panasonic Blender is leaking, there are several possible causes: * The mill gasket might not be attached correctly. Make sure it's properly attached. * There may be foreign matter stuck to the mill gasket. If so, remove any debris. * The mill gasket might be damaged.
Why is the blade idling in my Panasonic Blender?
If the blade in your Panasonic Blender is idling, it could be due to a couple of reasons. The liquid amount might not be enough, so try adding more liquid. Alternatively, if you're using ice cubes, there may be too many; reduce the amount of ice cubes.
What to do if the Panasonic MX-EX1031 Blender jug is not set properly?
If the blender jug or mill container isn't set properly on your Panasonic Blender, turn it to "1" or the mill container and motor housing, then twist to secure the appliance.
General| Jar Material | Plastic |
|---|---|
| Speed Settings | 2 |
| Pulse Function | Yes |
| Blade Material | Stainless Steel |
| Voltage | 220-240V |
| Frequency | 50-60Hz |
