7
•
•
•
To disassemble Blender To disassemble Mill
To assemble Blender To assemble Mill
mill container base
mill gasket
Turn blender container base
counterclockwise to disassemble.
Twist the mill container base
counterclockwise.
Turn blender container clockwise to
assemble.
• Make sure that gasket is
set properly and container is
tightened properly to prevent
leakage.
• Do not attach or remove the
container after container base
is placed on the motor housing,
motor does not operate.
Twist the mill container base clockwise until you hear the
“click” sound.
• ,ylreporp denoitisopsiteksagllim eht taht erus ekaM
and
denethgit si esab reniatnoc llim eht taht kcehc
.egakael tneverp ot yleruces
攪拌機
乾磨刀座
To Next Page
Loading...
