EN11
2
Insert the blender into the
beaker and hold the
power button down to
start.
● Do not operate the blender
continuously for more than
1
minute. Rest over 3 minutes after
1 minute operation at two
consecutive cycles.
● Adjust speed by turning the speed
control. (MX-SS1 only)
● The blender lightly touch the bottom
of beaker and start blending.
● While operating, hold the beaker
steadily.
3
When blending is
complete, release power
button before removing
the appliance from the
mixture.
Unplug immediately after
use and remove the
blender attachment.
MX-SS1_MX-GS1_ASIA.indb 11 2013/10/11 9:37:41
To Next Page
Loading...
