Chopper attachment
(MX-SS1 only)
Chopper lid
Chopper
blade
Chopper
bowl
Blade shaft
Packing
Note
● Be sure to attach the chopper lid
correctly.
Incorrect
To attach
1
Insert the chopper blade into the blade shaft.
2
Match the groove inside of the chopper lid
and top of the chopper blade. If it is hard to
attach them, turn the top of the chopper
blade a little and close the chopper lid
again.
3
Align the groove of the chopper lid and
convex of the chopper bowl, then turn the
chopper lid clockwise to close it.
(You hear the “click” sound.)
4
Align the
and on the motor housing
and chopper lid.
5
Twist the motor housing to align
the
and to lock.
(You hear the “click” sound.)
● Reverse the steps to detach the chopper
attachment.
Whisk attachment
(MX-SS1 only)
Whisk
adapter
Whisk
To attach
1
Insert the whisk into the whisk adapter.
(You hear the “click” sound.)
2
Align the
and on the motor housing
and whisk attachment.
3
Turn the whisk attachment to align
the
and to lock.
(You hear the “click” sound.)
● Reverse the steps to detach the whisk
attachment.
To Next Page
Loading...
