How to get rid of the unusual odor in Panasonic NA-168VX3?
Rubber parts may give off a smell when you start using the appliance, but the smell will go away over time. You can wash the drum by running the 90°C programme.
What to do if the Panasonic NA-168VX3 Washer door does not open?
If the Panasonic Washer door won't open, it could be due to the door lock being activated, the child safety lock being engaged, or the water temperature or level being too high.
What does U11 error mean on Panasonic Washer?
If your Panasonic Washer displays error code U11, meaning it's unable to drain, check the drain hose for clogs, immersion in water, extension beyond 3 meters, or freezing. Also, clean the drain filter if it's clogged. After correcting the problem, open and close the door, and then start the wash again.
What does U14 mean on Panasonic NA-168VX3 Washer?
If your Panasonic Washer displays error code U14, it means it's unable to supply water. Check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water-supply filter is clogged. After correcting the problem, open and close the door, then restart the wash. Also, if the red mark appears in the hose with water-supply valve, it have been stop the water supply, so you should replace with a new hose.
Why does the remaining time change on my Panasonic Washer?
If the displayed remaining time on your Panasonic Washer changes, it's normal. The remaining time is estimated and corrected continually. The remaining time also increases if extra rinsing and spinning are required to correct an unbalanced load caused by laundry shifting.
How to fix U13 error on Panasonic Washer?
If your Panasonic Washer displays error code U13, meaning it's unable to spin-dry, this is often because the appliance has detected an unbalanced load, especially small loads. If the laundry is too heavy, untangle clumps of clothing. If items, such as blankets, are too large, reduce the load. If the laundry is too light, add one or two bath towels. If the appliance is on an unstable or uneven surface, change the setting location. After correcting the problem, open and close the door, and then start the wash again.
Why is my Panasonic Washer making noise when draining?
If there is noise when the water drains out of your Panasonic Washer, this is normal; it is noise created by the operation of the drain pump.
Why is no water going into my Panasonic NA-168VX3?
If no water is going into the Panasonic Washer, the water tap might be turned off, the water-supply hose may be frozen, the water supply may be disrupted, or the water-supply filter may be clogged.
Why does water build up during Panasonic NA-168VX3 Washer cycle?
If water builds up during the washing cycle of your Panasonic Washer, this is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Why is my Panasonic Washer making unusual noises?
If there is an unusual noise or vibration coming from your Panasonic Washer, there may be metal items in the drum, the anchor bolts may not have been removed, or the appliance may be on a sloping or unstable surface. If none of these is the cause, contact your local Customer Communication Centre.
Tips for eco-friendly laundry, detergent usage, and proper disposal of packaging and equipment.
Essential safety instructions for operation, power connections, and preventing injury.
Identification of machine parts, accessories, and an overview of buttons, dial, and display.
Step-by-step guide to starting washes, programme selection, and optional functions.
Instructions for cleaning components like the drum, filters, and detergent drawer.
Troubleshooting common faults, understanding error display codes, and finding solutions.
Guidelines for choosing location, moving, connecting hoses, power, and levelling.
Key technical data, dimensions, and power/water consumption details of the washing machine.
To Next Page
General