Why does my Panasonic NA-128VG5 Washer have an unusual odor?
- JjasonlawsonSep 12, 2025
Rubber parts may give off a smell when you start using the appliance, but the smell will go away over time.

Why does my Panasonic NA-128VG5 Washer have an unusual odor?
Rubber parts may give off a smell when you start using the appliance, but the smell will go away over time.
How to unlock buttons on Panasonic NA-128VG5?
If buttons on your Panasonic Washer don't work after starting a wash, you can only switch over by pressing Start/Pause during washing. To change the program, temperature, or settings after rinsing starts, switch off the appliance and then switch it back on. Also, check if the child lock is activated.
Why water flows into my Panasonic NA-128VG5 but is not stored?
If water flows into your Panasonic Washer but isn't stored, avoid opening the door to pour water or hot water directly into the drum, as this can cause the water to drain immediately. Also, when you restart the appliance, water drainage may occur.
Why is water drained mid-way in my Panasonic NA-128VG5?
If water is being drained mid-cycle in your Panasonic Washer, this may be because the appliance has detected too much foam. The washer may repeatedly drain and supply water to remove the excess foam.
Why does the spin drying step start and stop repeatedly on my Panasonic NA-128VG5 Washer?
If the spin drying step in your Panasonic Washer starts and stops repeatedly, this is normal. The spin drying step may be repeated but it will be preformed quietly. The laundry may also be too light. If so, add one or two bath towels.
Why does water flow into my Panasonic NA-128VG5 mid-way?
If water flows into your Panasonic Washer mid-cycle, it's likely because the water level has dropped, and the appliance is automatically replenishing it. When the amount of the laundry is large, water may be automatically replenished several times.
Why is there foam and water on the door of my Panasonic Washer?
If you notice foam and water on the door or door seal of your Panasonic Washer, it's normal. Some foam and laundry washing water might remain depending upon the state of the laundry and the amount of detergent used, but the rinsing performance is unaffected.
Why is no water flowing into my Panasonic Washer?
If no water flows into your Panasonic Washer, the water tap might be turned off. The water supply hose could be frozen, or the water supply may be disrupted.
Why does rinsing start before spin drying finishes in my Panasonic NA-128VG5 Washer?
If the rinsing process begins before the spin drying process finishes in your Panasonic Washer, it means that the laundry has leaned to one side, and the corrective rinsing process will begin to automatically correct the phenomenon of leaning to one side.
Why is water being drained mid-way from my Panasonic Washer?
If your Panasonic Washer is draining water mid-cycle, it may be due to excessive foam. The appliance may repeatedly drain and supply water to remove the foam.
Guide to identify the main parts of the washing machine.
How to select the appropriate place for installing the washing machine.
Steps to remove transport bolts for safe operation and to prevent vibration.
Instructions on how to level the washing machine for stability.
Detailed steps for connecting water supply and drain hoses, and power.
Procedures for checking the installation and performing a test run.
Procedures for checking the appliance and preparing laundry for washing.
Guidance on using programmes for washing wool and delicate items.
Explanation of the control panel buttons and their functions.
Guide on using the detergent drawer for detergents, softeners, and additives.
Detailed steps for loading, selecting, and starting a wash cycle.
Explanation of features like Preset timer and Individual washing functions.
How to activate/deactivate child lock and manage buzzer notifications.
Overview of all wash programmes, their loads, settings, and suitable laundry.
How to clean the exterior body of the washing machine using mild detergent.
Steps for removing and cleaning the detergent drawer to prevent residue buildup.
Monthly maintenance for cleaning the drain filter to ensure proper drainage.
How to clean the filter on the water supply hose to prevent blockages.
Procedures to prevent water supply hoses from freezing in cold weather.
A table listing common phenomena and their possible causes and solutions.
Explanation of error codes (U, H) displayed on the machine and how to resolve them.
Information on proper disposal of packaging and the appliance, and eco-friendly laundry tips.
Table detailing power and water usage for various wash programmes.
Key technical details of the washing machine model NA-128VG5.












Loading...