Washing
15
3
Start.
The pulsator moves without
water and measures the
amount of laundry
(approx. 5 seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
z To check the water amount
→Press “Water Level”.
4
According to the water amount
indication
Put in detergent.
z Approx. 20 seconds after the
water amount is displayed,
water supply begins.
5
Close the lid.
Operation ends with beeps.
After pressing “Start”
z You can change the water level until
the end of the wash process.
z You can change each of the
“Wash”, “Rinse” and “Spin”
operation contents until the end of
the wash process. Press “Pause”
beforehand.
z You cannot change the program.
To Next Page
Loading...
