Panasonic NA-F70G6 - Power;Water Outage and Program Issues

30
Specications
Model No. NA-F70G6 NA-F60G6
Rated voltage 220 - 240 V
Rated frequency 50 Hz
Rated power consumption 630 W 590 W
Standard water amount 69 L 66 L
Maximum capacity
(Dry cloth)
7.0 kg 6.0 kg
Product dimensions 595 mm (W) x 658 mm (D) x 1050 mm (H)
Product weight 38 kg
Pressure of tap water 0.01 - 1 MPa
Symptoms Points to be checked
Others
Power failure/
The breaker has tripped.
- Operation will resume from the point where it was
stopped when the power is recovered (Auto Restart).
Water outage
- When water supply is recovered, remove the water
supply hose, release turbid water from the faucet,
and then start the washing machine.
The “Stain Master” program
has no effect (Stains are not
removed).
- Pretreatments have been performed? (Hand
washing, applying stain remover, etc.)
- The amount of laundry is under 4.0 kg? (P. 17)
- The “Stain Master” program is selected according to
the type of stains? (P. 10)
Powder detergent remains
undissolved.
- Put the detergent in the detergent/bleach inlet. (P. 12)
Operation stops in the
middle of wash or rinse
process.
- Is the lamp ashing?
→ The pulsator occasionally stops to soak clothes
while the lamp keep ashing. This is not abnormal.
Troubleshooting (continued)