Maintenance
23
6
Remove the lter and remove
dirt on the lter.
Water supply lter
7
Reattach the lter to its
original position.
Main unit, lid
If stained with detergent
or softener
Wipe with a slightly damp soft
cloth.
(To prevent damage to resin parts or
metal corrosion)
z For heavy soiling, wipe with a damp
cloth with a small amount of mild
kitchen detergent.
z Do not clean using citrus based or
any other strong chemical cleaners
on resin parts of machine as it may
cause discolouration and cracking
of the surfaces.
Water supply lter
If water does not ow smoothly
z Follow the procedure below to
prevent splashing of water.
1
After turning off
both hot and cold
the water faucets
Turn the power on.
2
Select Hot or
Warm.
3
Start.
4
After approx.
40 seconds
Turn the power off.
5
Loosen the nut and remove
the hose.
To Next Page
Loading...
