To Next PageTo Next PageWhat to do if my Panasonic NA-F70S6 Washer has no operation?
If your Panasonic Washer isn't operating, check these things: ensure there wasn't a power failure, and that the lid is completely closed. Also, verify that the power fuse hasn't blown or the breaker tripped, and that the power plug is fully inserted. Make sure the water faucet is turned on, you pressed 'Start,' and the timer reservation isn't set.
What to do if my Panasonic Washer displays an error indication for past two times?
If your Panasonic Washer displays an error, it will initially show [E]. Press the [Power Soak] button to switch between the last error and the error before that, returning to [E] as the initial mode. If there were previous abnormal alarms, [U] or [H] along with a number will be displayed. Note that [U12], [H15], and abnormal test checks are not recorded.
Why is there no water supply to my Panasonic Washer?
If your Panasonic Washer isn't getting water, make sure the water faucet is turned on and that there isn't a water outage. Also, check if the water supply filter is clogged with dirt.
How to resume operation after a power failure with Panasonic NA-F70S6?
After a power failure, your Panasonic Washer will automatically resume operation from where it stopped, thanks to the Auto Restart function.
Why does the time indication on my Panasonic Washer increase or not change?
The operation time on your Panasonic Washer may increase or not change if the laundry is concentrated on one side, or if the water supply or drainage isn't working well.
Why does my Panasonic Washer operation suddenly change to rinse?
If your Panasonic Washer suddenly switches to the rinse cycle, it's likely because the clothes are concentrated on one side of the tub. The machine automatically corrects this imbalance by starting the rinse process. Try to place clothes as evenly as possible.
What to do if there is a water outage during a Panasonic Washer cycle?
If there's a water outage during a Panasonic Washer cycle, when the water supply returns, remove the water supply hose, release any turbid water from the faucet, and then restart the washing machine.
What to do if Panasonic Washer starts with rinse but no water is supplied?
If your Panasonic Washer starts with the rinse cycle but no water is supplied, water will be supplied after the spin cycle if there is no water in the tub. If there is water in the tub, water will be supplied after water discharge.
How to check the running number on my Panasonic NA-F70S6?
Initially, [C] will be displayed on your Panasonic Washer. Press the [Power Soak] button to change the displayed digit of operation times. Press once to see the Thousands-Hundreds digits (e.g., [12] for 1234), and press twice for the Tens-Ones digits. The running number counts all [Wash Rinse Spin] processes. When the count exceeds 9999 times, only the Thousands digit is shown, continuing from [A000] to [A999].
General| Type | Top Load |
|---|---|
| Capacity | 7 kg |
| Color | White |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Aqua Spin Rinse | Yes |
| Auto Power Off | Yes |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
Guidelines for detergent amount based on water level indication.
Indicates water level and approximate remaining wash time.
Options for setting wash water temperature (Hot/Warm/Cold).
Adjusting water level and setting wash finish time (Reserve).
Automatically adjusts operation time and water level based on laundry.
Instructions on adding detergent, avoiding direct tub placement.
Guidelines for using bleach, including restrictions.
How and when to add fabric softener automatically.
Program for gently washing delicate garments and stylish clothing.
Program for washing delicate clothes and stylish garments.
Instructions for washing bed sheets, including material and weight limits.
Use this program to wash heavily soiled laundry.
Removes water from clothes using air blown from tub rotation.
Instructions for performing wash, rinse, and spin cycles.
Procedure to stop the end-of-cycle buzzer.
Function to prevent accidental operation by children.
Method to manually rotate the tub for access.
Instructions on cleaning the lint filter after each operation.
Procedure to clean the water supply filter if water flow is poor.
Weekly Air Dry and monthly Tub Hygiene for tub maintenance.
Wiping the exterior of the washing machine with a soft cloth.
Guidelines for choosing a suitable installation site.
Procedure for attaching the bottom cover securely.
Instructions for attaching the external drain water hose.
Connecting the water tap adaptor and supply hoses.
Connecting the power plug and ensuring proper grounding.
Adjusting legs to ensure the machine does not wobble.
Performing initial checks after installation.
Checks for drain hose issues like crushing or clogging.
Indicates the lid was open during operation.
Checks for uneven load distribution or unstable installation.
Checks for water faucet, outage, or clogged filter.
Occurs if lid is open for 10 seconds with Child Lock active.
Indicates the need to unplug and contact service.
