To Next PageTo Next PageWhy does my Panasonic NA-FD10X1 spin then rinse?
If your Panasonic Washer spins and then unexpectedly switches to the rinse cycle, this is likely because the appliance is automatically correcting an uneven distribution of clothes within the drum. The washer uses the rinse process to redistribute the load and ensure proper spinning.
What happens if there is a power failure with my Panasonic NA-FD10X1 Washer?
If your Panasonic Washer experiences a power failure or the breaker trips during operation, don't worry. The washer is designed to resume the wash cycle from the point where it stopped once the power is restored.
What to do if my Panasonic Washer won't start?
If your Panasonic Washer isn't starting, make sure that the lid is securely closed, the power is on, the power plug is fully inserted into the outlet, the start button is pressed, and the breaker is on.
How to dissolve powder detergent in my Panasonic NA-FD10X1 Washer?
If you find that powder detergent is not dissolving properly in your Panasonic Washer, try placing the detergent in the bleach inlet instead.
Why is my Panasonic NA-FD10X1 Washer filling with water while washing?
If water is being supplied to your Panasonic Washer while it is already in the washing cycle, check if this happens when the water level drops or when the amount of laundry is large.
General| Type | Top Load Washer |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 700 RPM |
| Wash Programs | Delicate |
| Features | ActiveFoam System, Child Lock |
Critical warnings about preventing injury, death, fire, and electric shock during operation.
Explanation of the washing machine's operation panel layout and key functions.
Step-by-step guide on how to perform a wash cycle, including selecting programs and starting.
A summary table detailing the time, wash, rinse, spin, and temperature settings for all programs.
Guidelines for choosing an installation location and preparing the site.
Steps for correctly connecting the hot and cold water supply hoses.
Guide for connecting the power plug, grounding, and ensuring the machine is level.
Explains error codes like U11, U12, U13 and their initial checks.
Details error codes U14 (water supply) and U99 (forcible drainage) and related checks.
Addresses problems with time display, longer than indicated times, and no operation.
