To Next PageTo Next PageWhy does my Panasonic NA-FD12X1 Washer spin then change to rinse?
If your Panasonic Washer spins and then changes to the rinse cycle, it might be because the clothes inside are unevenly distributed. The appliance automatically corrects this by initiating a rinse process to redistribute the load.
What to do if my Panasonic NA-FD12X1 Washer has no operation?
If your Panasonic Washer isn't operating, make sure that the lid is securely closed, the power is on, the power plug is completely inserted into the outlet, the 'Start' button is pressed, and the breaker is turned on.
Why is there noise when water drains out of Panasonic NA-FD12X1 Washer?
The noise you hear when water drains out of your Panasonic Washer is normal. It comes from the drain pump.
Instructions regarding children's use and supervision to prevent injury.
Guidelines for safe use of electrical components and power cord to prevent shock.
Precautions related to machine operation to prevent injury or damage.
Guidelines for handling power cords, plugs, sockets, and grounding.
Safety advice for connecting the washer to a hot water heater due to potential hydrogen gas.
Warnings against self-repair and advice to avoid finger/hand/foot injuries.
Instructions on turning off the faucet and using new hose-sets to prevent water leakage.
Keep away from heat, sunlight, and do not obstruct the appliance's openings.
Guidelines for choosing a suitable installation location and the importance of professional setup.
Critical warnings against self-installation and improper placement on packing.
Correctly connecting HOT and COLD water supply hoses, ensuring firm connections.
Steps for connecting power, grounding, and ensuring the machine is level.
How to perform a trial run to verify functionality and check for errors.
Steps to resolve issues related to water drainage and lid closure errors.
Troubleshooting for spin/dry function failures and lid open errors.
Solutions for U14 (no water supply) and U99 (forced drainage) errors.
Actions to take when the H00 error code indicates a need for inspection.
Steps to diagnose and resolve issues where the washing machine fails to start.
General