To Next PageTo Next PageHow to fix a Panasonic NA-FD135X3 Washer that shows no operation?
If your Panasonic Washer isn't starting, make sure of the following: * The lid is completely closed. * The power is turned on. * The power plug is fully inserted. * You have pressed the 'Start' button. * The breaker is on. * You have pressed the 'Start' button.
How to fix a Panasonic Washer that has no operation?
If your Panasonic Washer isn't starting, make sure to close the lid, turn the power on, fully insert the power plug, press the 'Start' button, and ensure the breaker is on. Press 'Start' again to confirm.
What to do if water is supplied while washing and water level drops in my Panasonic NA-FD135X3?
If water is being supplied while your Panasonic Washer is washing and the water level is dropping, check if the laundry load is large.
What to do if my Panasonic NA-FD135X3 started with no rinse, but water is supplied after spin?
If your Panasonic Washer starts operating without a rinse cycle but then supplies water after the spin cycle, check if there is water in the tub.
Why does my Panasonic Washer spin change to rinse?
Guidelines for children's use and supervision, and general usage restrictions.
Precautions regarding wet hands, power cords, plugs, and damaged cords.
Warnings about dust, flammable materials, self-repair, and operating conditions.
Advice on avoiding finger/hand injuries and preventing water leaks.
Warnings about heat, sunlight, obstructions, hot water, and waterproof items.
Labels and visual identification of the washing machine's main parts.
Lists and illustrates the accessories provided with the appliance.
Steps for preparing clothes, using nets, and following care labels before washing.
Explains the display, remaining time, and indicator lamps like Child Lock.
Details on program selection, Start/Pause, Power, and other control buttons.
Important notes regarding power failure recovery and auto power off.
Step-by-step guide from program selection to starting the wash.
Options to modify operations or water level while the cycle is in progress.
Details on programs like Normal, Tangle Care, Speedy, Delicates, Baby Care, Water Save, Blanket with their purposes and capacities.
Details on Soak, Stain Master, Odour/Aroma+, Mud, Soya/Sauce programs.
Information on Air Dry and Tub Hygiene programs.
Guidelines for using detergents and bleach, including foam level and correct placement.
Instructions for adding softener, important notes, and program compatibility.
How to set the operation to start after a delay.
Steps for selecting specific wash, rinse, or spin cycles.
Usage details for Delicates and Blanket programs, including water levels.
Detailed instructions and important notes for using the Stain Master program.
Explains how the Air Dry function works and what clothes are suitable.
Step-by-step instructions and important usage notes for the Air Dry function.
How to use the Auto Tub Clean function to prevent mould.
How to activate, deactivate, and cancel the Child Lock feature.
How to cancel the end-of-cycle buzzer.
A table summarizing total time, wash, rinse, and spin times for all programs.
Explanation of the "Refill" function for adding water during rinse.
Steps for removing and cleaning the lint filter.
How to clean the detergent drawer, main unit, and lid.
Instructions for cleaning the water supply filter and the tub using Air Dry and Tub Hygiene.
Guidelines for choosing an installation site and recommending professional setup.
Steps for attaching the bottom cover and connecting the drain hose.
Detailed instructions for connecting the water supply hose and power.
Ensuring the machine is level and performing a trial run.
Troubleshooting for "Water cannot drain" and "Lid is open" error codes.
Troubleshooting for "Spin/Air Dry not possible" and "Water cannot be supplied" errors.
Explains "Water forcibly drained" and "Inspection required" codes.
Resolving problems with time indications and extended operation times.
Steps to take if the machine won't start or settings can't be changed.
Troubleshooting common issues during wash, rinse, and spin stages.
How to handle power interruptions and issues with the Stain Master program's effectiveness.
Details on voltage, frequency, power, water amount, and pressure.
Information on dimensions, weight, and maximum dry cloth capacity.
General