To Next PageTo Next PageHow to troubleshoot a Panasonic Washer that shows no operation?
If your Panasonic Washer isn't operating, ensure that the lid is securely closed, the power is turned on, the power plug is fully inserted, the breaker is on, and you have pressed the “Start” button.
What to do if I cannot change process settings on my Panasonic NA-FD18V1 Washer?
You can only change the process settings during the wash process by pausing, or after the wash process is complete by turning the power off and then on again.
What to do if there is a power failure with my Panasonic NA-FD18V1?
If the power fails or the breaker goes off, the Panasonic Washer will resume operation from where it stopped once the power is restored.
Why does my Panasonic NA-FD18V1 Washer spin change to rinse?
If the clothes are unevenly distributed inside the Panasonic Washer, the appliance will automatically correct this by initiating a rinse process.
Why is water supplied while laundry is large in my Panasonic Washer?
When washing a large load, the Panasonic Washer automatically adds water as needed.
General warnings about potential serious injury or death from improper appliance use, especially concerning children.
Precautions to prevent electric shock, fire hazards from dust, and improper plug usage.
Advice on preventing fires from dust accumulation and warnings against self-repair or modification.
Guidance to avoid finger entrapment, contact with hot parts, and prevent water leakage.
Instructions on avoiding heat, sunlight, and not washing certain items or using hot water.
Steps for preparing clothes, including pre-laundry checks, using nets, pretreatments, and observing care labels.
Description of the washing machine's operation panel, including display indicators, buttons, and program selection.
Detailed steps for operating the washing machine, from selecting a program to starting the wash cycle.
Details on Normal, Tangle Care, Speedy, Delicate, Baby Care, Water Save, and Blanket wash programs.
Information on Soak, Stain Master +, Air Dry, and Tub Hygiene programs.
How to use the Preset function and adjust Wash/Rinse/Spin cycles for various programs.
Specific usage instructions and capacity for Delicate and Blanket wash programs.
Explanation of the Stain Master + program, including preparation and usage guidelines.
Details on the Air Dry function and the ECONAVI energy-saving feature.
Instructions for setting Auto Tub Clean and Child Lock, including their lamp indications and operation.
How to cancel the end buzzer and manually turn the tub for cleaning or maintenance.
Procedure for cleaning the lint filter after each operation to ensure optimal performance.
Instructions for cleaning the detergent and softener drawer and the main unit/lid.
Steps to clean the water supply filter if water flow is not smooth.
Methods for cleaning the tub using Air Dry weekly and Tub Hygiene monthly.
Guidance on selecting a suitable location and the recommendation to use a service person for installation.
Steps to attach the bottom cover and the external drain water hose correctly.
Instructions for connecting the water supply hose securely to prevent leakage.
Connecting power, ensuring the machine is level, and performing a trial operation.
Troubleshooting steps for error codes related to water drainage, lid status, and spin impossibility.
Troubleshooting for errors indicating no water supply, forced drainage, or required inspection.
Troubleshooting for incorrect time indications, no operation, and inability to change settings.
Addressing issues with water supply, water level, rinse, and spin cycle malfunctions.
Resolving problems with power interruptions, program effectiveness, and undissolved powder detergent.
General