To Next PageTo Next PageWhat to do if the Panasonic NA-S956FC1 Washer/Dryer door does not open?
If the door of your Panasonic Washer/Dryer won't open, check the temperature and water level. Also, check if Child Lock is activated. If there was a power cut, check if the power has been restored.
Why is my Panasonic NA-S956FC1 Washer/Dryer making unusual noise?
If your Panasonic Washer/Dryer is making unusual noise or vibrating, it might be due to a slope or an unstable surface. Try adjusting the 4 feet of the appliance. Also, check for any metal items that may be causing the noise and inspect the anchor bolts.
What to do if my Panasonic NA-S956FC1 Washer/Dryer has no reaction during operation?
If your Panasonic Washer/Dryer isn't reacting during operation, try these steps: First, ensure the Child Lock is off. Check if there was a power cut and turn the power back on. Make sure the door is closed properly. Unplug the appliance and plug it back in after 30 seconds. Press the 'Start' button. Finally, verify that the breaker is turned on.
Why is the drying cycle taking so long in my Panasonic Washer/Dryer?
If drying in your Panasonic Washer/Dryer is taking too long, it could be due to a load that is too heavy. Also, check if the surrounding conditions are too cold and ensure there is enough space around the appliance.
Why does the foam level vary in my Panasonic NA-S956FC1?
If you notice variations in foam levels in your Panasonic Washer/Dryer, check the temperature, water level, and water softness. Also, inspect the type and amount of detergent you're using. Ensure you are using the correct powder detergent and amount of detergent for your load. Consider whether the load is heavily soiled, and if the foam level is low.
How to fix unevenness during the spin process in my Panasonic NA-S956FC1?
If you experience unevenness during the spin process of your Panasonic Washer/Dryer, try adding one or two bath towels to balance the load. Additionally, wipe away any excess foam or water that may be contributing to the imbalance.
Why does the remaining time not decrease on my Panasonic NA-S956FC1?
The remaining time on your Panasonic Washer/Dryer may not decrease if the settings have been changed during the cycle or if the clothes are unevenly distributed inside the drum. In the latter case, the remaining time may even increase.
General| Washing Capacity | 9.5 kg |
|---|---|
| Drying Capacity | 6 kg |
| Energy Rating | A+++ |
| Spin Speed | 1400 rpm |
| Loading Type | Front Load |
| Color | White |
| Capacity | 6 kg (Dry) |
| Type | Washer/Dryer Combo |
Precautions to prevent severe injury or death from appliance misuse.
Precautions to prevent fire or electric shock hazards.
Safety measures to prevent fire hazards during drying.
Warnings to prevent water leakage.
Precautions to avoid injury.
Precautions to prevent appliance malfunction.
Explains the fundamental process for washing and drying clothes.
Details temperature, spin, and dry settings for each program.
Steps to clean the water supply filter.
Steps for performing the automatic tub cleaning.
Instructions for cleaning the drain filter.
Steps to take when buttons do not respond.
Solutions for when the machine does not start.
How to open the door when it's locked during use.
Steps to resolve a door that won't open.
Solutions for water drainage issues during washing.
Reasons and fixes for slow drying times.
Addresses issues during the spin cycle.
Addresses causes of abnormal noise and vibration.
Troubleshooting steps for drainage errors.
Troubleshooting steps for spin errors.
Solutions for water supply errors.
Troubleshooting steps for drying drainage errors.
Troubleshooting steps for spin errors.
Guidance on selecting an appropriate installation site.
How to adjust feet for a level installation.
Step-by-step guide to perform an initial test run.
Troubleshooting steps for U81 error.
Troubleshooting steps for U82 error.
Troubleshooting steps for U83 error.
Troubleshooting steps for U84 error.
