Why does the remaining dry time not decrease on my Panasonic NA-S106G1 Washer/Dryer?
If the remaining “Dry” time on your Panasonic Washer/Dryer isn't decreasing or suddenly decreases, remember that the displayed time is just a guideline and may differ from the actual time.
What to do when a power cut occurs with my Panasonic NA-S106G1?
Switch on the power and restart the appliance.
Why does the displayed remaining time change on my Panasonic NA-S106G1 Washer/Dryer?
The display is only a guide and is corrected continually.
What to do if foam or water remains on the door seal of my Panasonic NA-S106G1?
If your Panasonic Washer/Dryer has foam or water remaining on the door or door seal, wipe it away before removing the laundry.
Why does rinsing begin before the spin process finishes in Panasonic NA-S106G1?
If rinsing begins before the spin process finishes in your Panasonic Washer/Dryer, it's likely because the appliance detected an unbalanced load and automatically started rinsing to correct it. It can also happen if excess foam remains after washing; the water is drained and refilled to wash the foam away.
How to reduce static electricity in Panasonic Washer/Dryer?
To address static electricity in synthetic fibers after drying in your Panasonic Washer/Dryer, add fabric conditioners to wash loads during the final rinse cycle.
Why is water not supplied to the drum during rinse process in Panasonic NA-S106G1?
If water is not supplied to the drum during the rinse process of your Panasonic Washer/Dryer, it's because the appliance spins to drain out any remaining water before filling up with fresh water for rinsing.
Why is the display unclear on my Panasonic Washer/Dryer?
If your Panasonic Washer/Dryer display is unclear, it may be because the appliance is in a brightly lit or sunlit area.
Why does the drum stop and rotate during spin process in Panasonic NA-S106G1 Washer/Dryer?
If your Panasonic Washer/Dryer stops and rotates the drum several times during the spin process, it's automatically trying to correct an unbalanced load. Try adding one or two bath towels to balance the load.
What to do if the door does not open on my Panasonic NA-S106G1?
If the door of your Panasonic Washer/Dryer won't open, try these steps: 1. If the appliance is running, switch it off and then on again. 2. Run the Spin operation. After the water is drained and the temperature falls, you can open the door. 3. If there was a power cut while the door was locked, it will remain locked until the power is restored.
Covers warnings for safe operation, preventing injury, and appliance damage.
Identifies key parts of the washing machine and its accessories.
Explains control buttons, dial, and display indicators for operation.
Step-by-step guide for basic wash and dry operations.
Comprehensive list of programmes with load capacities and timings.
How to change temperature, water level, spin speed, and preset end time.
Explains additional wash options like Wash Mode, Prewash, and Extra Rinse.
Covers cleaning filters, drum, drawer, and handling frozen hoses.
Advice on achieving good wash results and avoiding common issues.
Explains common error codes and their corresponding resolution steps.
Guidelines for selecting a suitable and safe location for the appliance.
Detailed steps for connecting the water supply and drain hoses correctly.
Technical details including model, dimensions, power, and water usage.
General| Washing Capacity | 10 kg |
|---|---|
| Capacity | 10 kg |
| Washing Method | Pulsator |
| Number of Wash Programs | 16 |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Loading Type | Top Loading |
To Next Page