Panasonic SmartApp+ (continued)
NOTE
z To cancel the remote control mode and unlock the door → turn the power o.
z When there is no remote control from the app, the remote control mode is released
after 23 hours. During remote control mode, all buttons on the appliance (except )
are disabled. You can only control the washing machine from the app. After 23 hours,
the normal screen is displayed and the remote control is disable.
After initial setting is completed, you can use the app.
Preparing to use the “Remote” function
You need to prepare the washing machine before going out.
1
150
MAX
100
50
2
On
Lights
(On)
3
Hold
5 sec.
All other indications
turn off, except:
Approx. 2 sec.
After 10 min.
To check the communication status with the lamp on control panel.
Light up
Communicatable (Connected)
Blinking
Trying to communicate
(Connecting to server)
O
Not connected
■ Lamp position
Using the “Panasonic SmartApp+”
NOTE
z Close the door
completely.
54
To Next Page
Loading...
