— 27 —
NC-HU301P, NC-HU401P
4.11. Front panel
1. Take out 2 screws.
2. Turn over the body.
3. Release the 2 hooks by pushing with needle-nose plier.
Points when working
• Wear gloves when disassemble the front panel.
(to avoid dirt and for safety.)
Point when assembling
• Set the 4 hooks of front panel to the slit of body, and insert
it pressing up by hands.
• Wear gloves while working.
71-giF61-giF
4x16 Flush head Taptite screw
Hooks
Body
Hook
Front panel
Body
To Next Page
Loading...
