EN9
Keep-warm Function
Press key
Notifies when boiled
(
Setting of warm keep
temperature does not vary.
)
peep peep
peep peep
Flash Light on
Light on
Notice
Setting is released when water is added while
lights on. ( lights off)
Setting will be released when , and
buttons are pressed while flashes.
How to use
Timer
Keep-warm Function
z
Energy can be saved if keep-warm
temperature is lower.
z
Approximately 80 ºC of water is the
suitable for natural leaf tea.
When the unit will not be used for a
short time, such as when you go out
for a day...
Setting the timer
z
While setting the timer, the
electrification of heater stops.
Setting the energy saving
z
Control the heater according to
the usage. Heater is on at the time
interval when it is reached dispensing
time and it will be turned off
automatically to save the energy on
keep-warm function.
z
This is recommended when dispense
time is regularly fixed.
Make the water suitable
for brewing tea.
(Healthy Tea)
Notice
z
The keep-warm temperature or
the timer can be set while the water
is being boiled or being kept warm.
z
After power is restored in the event
of a power and LCD failure, the keep-
warm temperature will be automatically
set to “90”, even if the timer or the
“98” or “80” keep-warm function was
previously selected.
To Next Page
Loading...
Need help?
General
