Panasonic NC-ZA1 - Page 37

EN37
CleaningCycle:
Use this cycle occasionally and/or when the display shows .
This cleaning programme enables intensive cleaning of inaccessible areas. This programme takes approx. 8 minutes and should
not be interrupted. When display shows
, press and follow steps from 3.
1
Press onthemainmenu.
2
Select“cleaningprogramme”.
Note
• If is pressed, the display will return to the main menu.
3
Fillthewatertankwithwater,thenpress .
Note
• If is pressed, the display will return to the previous display.
4
Placethecleaningtabletintothepowdercoffeeshaftandclosethelids,
thenpress
.