Panasonic NE-1257R - Outline Diagram

Outline Diagram
(8)
(1)
(2)
(3)(4)
(5)
(6)(7)
(9)
(10)
—— ——
7908) seve
LEVEL
HI MED OE
(1) Digital Display Window (see below) (8) Number/Memory pads
(2) Power Level Indicator Display (9) Stop/Reset pad
(3) Program pad (10) Start pad
(4) Shift (A/B) pad (11) Oven Lamp Cover
(5) Power Level Selector pad (12) Door Handie
(6) Double Quantity pad (13) Air Filter
(7) Triple Quantity pad (14) Splatter Shield (top of inner cavity)
A — Program Display
B — Heating Time Dispiay (min. sec.)
C — Memory Pad Number Display
D — ist Stage Heating indicator
E — 2nd Stage Heating indicator
F — 3rd Stage Heating Indicator
G — Power Level Indicator
This oven is preset at the factory as follows:
@ Manual operation
@ Number/Memory pads preset HIGH power at the indicated heating times for single stage heating
1=10sec. 2=20seCc. 3 = 30 sec. 4 = 40 sec. 5 = 50 sec.
6 = 1 min. 7 = 1 min. 15 sec.8 = 1 min. 30 sec.9 = 1 min. 45 sec.0 = 2 min.
(There are two sides, A and B. Only A-side is preset.)
@ Program Unlocked
@ Cycle Counter set to “0” on all pads
If you wish to change these settings, please consult the operating instructions for programming procedure.
-6-