Panasonic NI-GHD015

English
English
23
22
Problem Causes Solution
No steam
or
irregular
steam
►
The product is not fully
heated.
Wait about 20
seconds before using
the product.
►
The power plug is not
connected or the
steam button is not
pressed.
Connect the power
plug and press the
steam button.
►
There is no or insu󰀩-
cient water in the water
resevoir.
Fill the water resevoir
(by referring to "How to
ll water" on Page 15).
►
The product is used in
a wrong direction (e.g.
the product is upside
down, the product is
placed horizontally, or
the steamer head
faces upward).
Use the product in the
correct direction.
►
The air vent on the
water inlet cap is
blocked.
Unblock the air vent
with a wooden or
bamboo toothpick.
►
The circuit fails or the
fuse is burned out.
Send your product to
an authorized service
center for inspection
and repair.
Trouble-shooting Trouble-shooting
Problem Causes Solution
Water
leakage
occurs
►
The inner pipe is loose
or damaged.
Send your product to
an authorized service
center for inspection
and repair.
►
The product is not fully
heated.
Wait about 20
seconds before using
the product.
The
product
makes a
noise
►
When the water
resevoir is empty, the
water pump will run
idle, thus making a
noise.
Fill the water resevoir
(by referring to "How to
ll water" on Page 15).
►
The product is used in
a wrong direction (e.g.
the product is upside
down, the product is
placed horizontally, or
the steamer head
faces upward).
Use the product in the
correct direction.
►
The inner pipe is loose
or blocked.
Send your product to
an authorized service
center for inspection
and repair.
The problem persists even after you
have followed the above solutions.
NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 7NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 7 2022/9/1 13:34:052022/9/1 13:34:05