Panasonic NI-JW670C

a) Remove the Handle cover(A) screw and move gently
the Steam/Dry selector toward left down direction
with left thumb, in order to loose the Handle cover(A)
and lift it.
b) Lift the Steam/Dry selector, Jet of steam button
assembly and Spray nozzle assembly from the Handle
assembly.
５． ＲＥＭＯＶＡＬ ＯＦ ＨＡＮＤＬＥ ＡＳＳＹ
a) Firstly, remove the Handle screw and Handle cover(B)
screws(B), and then lift the Handle assembly.
b) Remove the Handle cover(B) screw(A), and then
lift the Handle cover(B).
c) Remove the Balls, Water inlet rubber and Valve steam
assembly from the Water tank.
６． ＲＥＭＯＶＡＬ ＯＦ ＷＡＴＥＲ ＴＡＮＫ
Remove Water tank screws(A)and(B), then lift the
Water tank.
４． ＲＥＭＯＶＡＬ ＯＦ ＨＡＮＤＬＥ ＣＯＶＥＲ (Ａ)
― 4 ―