Panasonic NN-8508 - Page 31

NN-8508, NN-8558
NN-8808, NN-8858
NN-8808P
DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE
1. To Set Clock
OPERATION DISPLAY
1. Plug the power supply cord into wall
receptacle.
2. Tap Clock pad.
3. Enter time of day (TOD) by tapping
appropriate number pads.
4. Tap Clock pad.
TOD has now been registered into the
digital programmer circuit and will
count up by minutes.
2. Time Cooking For Two Stage
OPERATION
1. Place a water load in the oven.
2. Tap Power pad once for High power.
(1st stage)
3. Set for 5 seconds by tapping Number
pad.
4. Tap Power pad 3 times for Medium
power.
{2nd stage)
5. Set for 10 seconds by tapping Number
pad.
OPERATION DISPLAY
6. Tap Start pad.
7. When first stage cooking time has
elapsed, oven automatically switches
to 2nd stage cooking.
8. When 2nd stage cooking time has
elapsed, oven beeps 5 times and
shuts off.
3. Auto Weight Defrost
1. Tap Auto Weight Defrost pad.
2. Set the weight to 1 pound by tapping
1.0 Ib pad once.
3. Tap Start pad.
4. Tap Stop/Reset pad twice. * Oven shuts off.
* The display window will show
TOD again.